User Guide for 3M Tegaderm CHG I.V. Port Dressing
Quick guide and application steps for 3M Tegaderm CHG I.V. Port Dressing (models 1665 and 1665NS). Learn how to apply the dressing correctly.
Table of contents
Important Notice Regarding Packaging
3M has discontinued the inclusion of sticky notes with application instructions on the packaging for 3M Tegaderm CHG Chlorhexidine Gluconate I.V. Port Dressing (models 1665 and 1665NS). The official Instructions for Use (IFU) and product application guides remain available for users.
Application Steps
The application process involves the following steps:
- Prepare the site and remove the dressing from the sterile packaging.
- Peel back the liner to expose the adhesive side.
- Position the dressing over the I.V. port site.
- Apply the dressing firmly to the skin, ensuring the CHG gel pad is centered over the insertion site.
- Smooth the edges to ensure a secure seal.
- Remove the frame and secure the dressing edges.
Support
If you have questions regarding the product or application, please contact your local 3M Sales Representative or the 3M Health Care Customer Helpline at 1-800-327-5380.
Manufacturer information
3M
Practical help
Common problems
3M has removed sticky notes from packaging. Refer to the official IFU or the application guide provided in this document.
Before use
- Verify the product model (1665 or 1665NS).
- Ensure the I.V. port site is clean and dry.
- Have the official Instructions for Use (IFU) available for reference.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.