findmanualpdf.com

Parts List for Agri-Fab 15-Gallon and 25-Gallon Spot Sprayer

Access the official parts list and exploded view diagram for Agri-Fab 15-Gallon and 25-Gallon Spot Sprayers. Identify replacement components, hardware, and assembly details for your equipment.

Table of contents

Parts Identification and Assembly

This document provides an exploded view diagram and a comprehensive parts list for the Agri-Fab 15-Gallon and 25-Gallon Spot Sprayers. Use this guide to identify specific replacement components, hardware, and the correct assembly order for your sprayer unit.

Exploded View Diagram

The exploded view illustrates the assembly of the tank, pump, spray wand, and associated hardware. Each component is marked with a reference number that corresponds directly to the parts list table provided in this document.

Exploded view diagram of the Agri-Fab Spot Sprayer
Exploded view diagram of the Agri-Fab Spot Sprayer

Parts List

The parts list details every component required for the sprayer, including:

  • Tank Components: Tank fill cap, lanyard, and sump fittings.
  • Pump and Plumbing: 1.6 GPM 100 PSI pump, hoses, hose clamps, and drain caps.
  • Spray Wand: Spray wand assembly, valve, extension, and plastic tip.
  • Hardware: Various screws, bolts, washers, and grommets used for mounting the pump and braces.
  • Electrical: Wire harnesses for the switch and battery, including the 15A fuse.

When ordering replacement parts, refer to the Part No. column in the table to ensure you receive the correct item for your specific model (15-Gallon or 25-Gallon).

Practical help

Common problems

Identifying correct hardware

Use the exploded diagram to match the screw or bolt location with the reference number, then check the parts list for the specific size (e.g., 10-24 x 3/8 truss head screw).

Pump maintenance

The pump is a 1.6 GPM 100 PSI unit. If replacing, ensure you use the correct RA QC fittings (Ref No. 26).

Before use

  • Verify all parts listed in the table are present before assembly.
  • Check that all hose connections are secure using the provided hose clamps.
  • Ensure the drain cap and washer are properly installed to prevent leaks.
  • Inspect the wiring harness for proper battery connection.
  • Confirm the spray wand valve is functioning correctly.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.