Allen + Roth 16-Inch Wall Bracket

Product Overview

The Allen + Roth 16-inch wall bracket is designed to provide sturdy support for shelving units. This product requires assembly and should be installed into wall studs for maximum stability.

Safety Information

Before beginning assembly, please read the entire manual. Ensure all bolts and screws are tightly fastened before use. Periodically check and tighten all hardware to maintain structural integrity. Note: The maximum load capacity for the hook is 20 lbs (9.06 kg).

Assembly Instructions

• Attach the hooks to the shelf brackets using the provided M6 x 9 mm bolts.
• Secure the shelf brackets to the wall at marked stud locations using the M4 x 45 mm wood screws.
• If using a compatible shelf (sold separately), attach it to the brackets from underneath using the M3 x 15 mm screws.

Estimated assembly time is approximately 20 minutes. A Phillips screwdriver is required but not included.

Care and Maintenance

To keep your wall bracket in good condition, use a soft, clean cloth for dusting. Never use water to clean the furniture, as it may damage the finish.

Warranty

This product includes a one-year limited warranty for the original purchaser covering defects in materials or workmanship. The warranty is void if the product is misused, overloaded, or assembled incorrectly.