User Manual for BFT Mitto 2 Remote Control
Quick guide for the BFT Mitto 2 remote control. Learn about battery replacement, technical specifications, maintenance, and proper disposal of your device.
Table of contents
Quick guide from the manual
This manual provides essential information for the BFT Mitto 2 remote control. The primary indicator for maintenance is the LED light; if it flashes, the battery is low and requires replacement. Ensure you handle the battery correctly to avoid short-circuiting the terminals.
Technical Specifications
- Frequency: 433.92 MHz
- Battery: 12V
- Range: 50 to 100 meters
- Models: Compatible with MITTO B RCB02 R1 (2CH) and MITTO B RCB04 R1 (4CH)
Maintenance and Battery Replacement
If the transmitter range decreases, it is likely due to the battery. When the LED flashes, the battery must be replaced. During replacement, ensure the battery terminals are not short-circuited or touched with bare hands.
Disposal
Materials must be disposed of in accordance with current local regulations. It is recommended to separate materials by type for recycling purposes.
Accessories
A wall mounting clip is available for the Kleio B RCA and Mitto B RCB series remote controls, allowing for attachment to a belt or sun visor.
Practical help
Common problems
This is often caused by a low battery. Check if the LED flashes, which indicates the battery needs replacement.
Do not short-circuit the battery terminals or touch them with bare hands during replacement.
Before use
- Verify the remote is compatible with your receiver (433.92 MHz)
- Ensure the battery is installed correctly
- Check for physical obstructions if the range is lower than expected
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.