User Manual for Bissell MultiClean Wet + Dry Drum Vacuum 2026M
Quick guide for the Bissell MultiClean Wet + Dry Drum Vacuum 2026M. Learn how to assemble, operate, and maintain your wet and dry vacuum cleaner effectively.
Quick answers from the manual
Quick answer
- The Bissell MultiClean Wet + Dry Drum Vacuum 2026M is designed for both wet and dry cleaning. Assembly involves connecting the hose, wand, and floor tool. Maintenance requires regular emptying of the drum and washing the filter, which must be air-dried for 24 hours before reuse. p. 3, 6, 7
Key actions
- Assemble the vacuum by connecting the hose to the drum and attaching the wand and floor tool. p. 3
- Clean the filter by removing it, washing it under water, and drying for 24 hours. p. 7
First start
- Connect the hose to the drum, attach the wand and floor tool, plug into a power outlet, and switch on. p. 3, 4
Show 3 more answers Show less
Problems and fixes
Empty the drum, check for hose clogs, or clean the filter.
p. 6, 7Maintenance and reset
- Wash the filter under running water and allow to air dry for 24 hours before reinstallation. p. 7
Where to find it in the PDF
- Assembly p. 3
- Operation p. 4, 5
- Maintenance p. 6, 7
Table of contents
Manual images
Click an image to enlargeQuick Start Guide
This manual provides instructions for the Bissell MultiClean Wet + Dry Drum Vacuum (Model 2026M). It covers assembly, operation, and maintenance procedures to ensure optimal performance for both wet and dry cleaning tasks.
Assembly
Follow these steps to assemble your vacuum:
- Attach the hose to the drum inlet.
- Connect the extension wand to the hose handle.
- Attach the desired floor tool or accessory to the wand.
Operation
To operate the vacuum:
- Ensure the filter is properly installed.
- Plug the power cord into an outlet.
- Use the power switch to turn the unit on.
- Select the appropriate tool for wet or dry cleaning tasks.
Maintenance and Cleaning
Regular maintenance is required for suction performance:
- Emptying the Drum: Unlatch the drum, remove the top assembly, and empty the contents.
- Cleaning the Filter: Remove the filter from the motor housing. Wash the filter under running water.
- Drying: Allow the filter to air dry completely for 24 hours before reinstalling.
Manufacturer information
Bissell Inc.
Practical help
Common problems
Check if the drum is full, the hose is clogged, or the filter is dirty and needs cleaning.
Remove the filter, wash under running water, and allow to air dry for 24 hours.
Before use
- Ensure the filter is properly installed in the motor housing.
- Check that the hose is securely connected to the drum.
- Verify the power cord is intact.
- Select the correct tool for the surface (wet or dry).
Manual page author
Emily Carter
User documentation editor