findmanualpdf.com

Installation Guide for BMW 3 Series Pedal Cover Set

Learn how to install your BMW 3 Series stainless steel pedal cover set. Includes step-by-step installation instructions, compatibility details for F30/F31/F34/F35 models, and essential safety tips for a secure fit.

Table of contents

Manual images

Jump to the section
Before and after installation comparison Page 1 Installing the pedal cover Page 2

Quick guide from the manual

To install your pedal covers, follow these essential steps:

Installing the pedal cover
Installing the pedal cover
  1. Clean the original pedal surface thoroughly to remove dust or oil.
  2. Align the new pedal cover with the original pedal.
  3. Press the cover firmly until it fits securely.
  4. For the brake pedal, stretch the rubber edge and press it around the pedal.
  5. Check the stability of the covers before driving.

Product Overview

This stainless steel pedal cover set is designed for BMW 3 Series vehicles. It features an anti-slip design, corrosion resistance, and a non-destructive installation process.

Before and after installation comparison
Before and after installation comparison

Compatibility

The pedal cover set is compatible with the following BMW 3 Series models produced between 2013 and 2019:

  • F30
  • F31
  • F34
  • F35

Package Options

The set is available in two configurations:

  • 2 PCS: Includes Brake and Accelerator pedals.
  • 3 PCS: Includes Brake, Accelerator, and Footrest pedals.

Safety Notes

For your safety, please adhere to the following guidelines:

  • Ensure the pedal cover is firmly installed before driving.
  • Check the pedal surface regularly to ensure a proper fit.
  • Do not attempt to install the covers while the vehicle is running.
  • If you are unsure about the installation process, professional assistance is recommended.

Manufacturer information

BMW

Brand profile
Manufacturer website https://www.bmw.com Support https://www.bmw.com/en/service-and-accessories.html Manufacturer manuals https://www.bmw.com/en/service-and-accessories/owner-manuals.html

Practical help

Common problems

Pedal cover feels loose or slips

Ensure the rubber edge is fully stretched and seated around the pedal. Clean the original pedal surface thoroughly to remove any oil or debris.

Difficult to fit the cover

Ensure the cover is properly aligned with the original pedal before applying firm pressure.

Before use

  • Ensure the vehicle is turned off and parked safely.
  • Clean the original pedal surface to remove dust or oil.
  • Verify you have the correct set (2 PCS or 3 PCS) for your vehicle.
  • Check that the rubber backing is intact.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.