Bosch GHO 18V-LI Cordless Planer Exploded View Parts Diagram
Detailed exploded view parts diagram for the Bosch GHO 18V-LI cordless planer. Identify internal components, motor assembly, drive belt, and housing parts for maintenance and repair.
Table of contents
Overview of the Bosch GHO 18V-LI
This document provides an exploded view parts diagram for the Bosch GHO 18V-LI cordless planer. It is intended for service professionals and users performing maintenance or component replacement. The diagram illustrates the internal assembly, including the motor, drive system, housing, and various fasteners.
Component Identification
The diagram breaks down the tool into its primary sub-assemblies:
- Motor and Drive System: Includes the motor (A/B), cooling fan, drive belt (25), and pulley system (802).
- Cutter Block Assembly: Features the main cutter block (50) with blades (853) and bearings (851).
- Housing and Controls: Shows the main housing halves (20), switch assembly (27), and various internal wiring connections (C, D, E, F, G).
- External Components: Includes the chip ejection port (22), depth adjustment knob (32), and base plate components.
Maintenance and Repair Notes
When disassembling the tool for maintenance, ensure all fasteners (19) are accounted for. The diagram highlights the specific placement of internal wiring and the alignment of the drive belt. Always ensure the battery is removed before attempting any inspection or repair of internal components.
Manufacturer information
Bosch
Practical help
Common problems
Inspect the drive belt (25) and pulley system (802) for wear or debris. Replace the belt if damaged.
Check the condition of the cutter blades (853) and ensure they are correctly seated in the cutter block (50).
Before use
- Ensure the battery is fully charged and disconnected before maintenance.
- Verify all housing screws (19) are tightened securely.
- Check the chip ejection port (22) for blockages.
- Inspect the depth adjustment knob (32) for smooth operation.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.