Installation Guide for Columbus 20BKLEDCCMVB LED Panel
Quick installation guide for the Columbus 20BKLEDCCMVB LED panel. Includes mounting instructions, CCT color temperature settings, electrical specifications, and safety precautions.
Quick answers from the manual
Quick answer
- The Columbus 20BKLEDCCMVB is a 20W LED panel. Installation requires a 553mm x 553mm cutout. It features a CCT selector for choosing between Warm (3000K), Neutral (4000K), and Daytime (6500K) light. p. 1
Key actions
- Disconnect power before installation. p. 1
- Set color temperature using the CCT switch. p. 1
Maintenance and reset
- Clean the luminaire and its internal parts with a clean rag periodically. p. 1
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power | 20W | Power consumption | p. 1 |
| Voltage | 100-277V | Operating voltage range | p. 1 |
Where to find it in the PDF
- Installation Guide p. 1
- Warranty Information p. 2
Table of contents
Important Information
The Columbus 20BKLEDCCMVB is an indoor LED panel. Installation requires a minimum ceiling cutout of 553mm x 553mm. The unit features a CCT selector switch to adjust color temperature between Warm (3000K), Neutral (4000K), and Daytime (6500K).
Safety Precautions
- Always disconnect the power supply before starting installation or maintenance.
- Maintain a minimum distance of 0.50m from any combustible material to avoid fire hazards.
- Use a clean rag and gloves when handling the luminaire to prevent burns and ensure cleanliness.
Installation Steps
- Preparation: Ensure the ceiling cutout is at least 553mm x 553mm.
- Wiring and Settings: Connect the electrical wiring. Use the CCT selector switch to choose the desired color temperature (WW, NW, or CW) before final installation.
- Mounting: Insert the panel into the ceiling cutout and secure it in place.
Technical Specifications
- Power: 20W
- Voltage: 100-277V, 50/60Hz
- Current: 0.20A - 0.07A
- Color Temperature Options: 3000K (Warm), 4000K (Neutral), 6500K (Daytime)
Warranty
The product includes a 5-year warranty for LED fixtures. Please contact the distributor or service center for warranty claims.
Practical help
Common problems
Check electrical connections and ensure power is disconnected during installation.
Adjust the CCT selector switch on the unit to the desired setting (WW, NW, or CW) before final mounting.
Before use
- Ensure power is disconnected
- Verify cutout dimensions (553mm x 553mm)
- Wear gloves for installation
- Check voltage compatibility (100-277V)
Manual page author
Emily Carter
User documentation editor