User Manual for Creative 1165A-SB Off-Road RC Car
Quick guide for the Creative 1165A-SB remote-controlled car, covering battery installation, remote control operation, maintenance, and safety precautions.
Table of contents
Quick guide from the manual
This document provides essential instructions for operating the Creative 1165A-SB remote-controlled car. It covers battery installation, basic driving controls, and maintenance requirements to ensure safe and optimal performance.
How to insert the batteries
- Ensure both the car and the remote controller switches are in the OFF position.
- Use a crosshead screwdriver to open the battery compartment cover.
- Insert batteries according to the polarity markings inside the compartment.
- Secure the battery cover back in place.
The car uses one 3.7V rechargeable battery (included), while the remote controller requires two 1.5V AA batteries (not included).
How to play
- Set both the car and the controller switches to the ON position.
- Use the remote control levers to maneuver the vehicle.
- If the car begins to lose performance or function, recharge the battery. The optimal charging time is 3-4 hours.
Remote control operation
- Move forward: Push both rockers upward.
- Move backward: Pull both rockers downward.
- Spin left: Push the left rocker upward and pull the right rocker downward.
- Spin right: Pull the left rocker downward and push the right rocker upward.
- Advanced maneuvers: Pushing rockers in specific combinations allows for flipping and spinning actions.
Care and maintenance
- Remove batteries from the toy when it is not in use for an extended period.
- Clean the toy gently with a clean, damp cloth.
- Keep the toy away from direct sunlight and excessive heat.
- Ensure the battery is fully charged before use.
- Avoid running the car on overly smooth surfaces if the flipping function is not performing correctly.
Battery safety information
- Do not short-circuit terminals.
- Do not attempt to recharge non-rechargeable batteries.
- Rechargeable batteries must be charged under adult supervision.
- Do not mix different types of batteries or new and used batteries.
- Dispose of batteries safely; do not dispose of them in fire as they may explode.
- Regularly examine the charger for damage to the cord, plug, and enclosure.
Manufacturer information
Guangdong Creative Double Star Technology Co., Ltd.
Practical help
Common problems
The battery may be low; recharge the included 3.7V battery for 3-4 hours.
Ensure the battery is fully charged and avoid running the car on surfaces that are too smooth.
Before use
- Ensure both car and controller switches are set to OFF before inserting batteries.
- Verify you have two 1.5V AA batteries for the controller.
- Ensure the 3.7V rechargeable battery is fully charged (3-4 hours).
- Check that the battery cover is securely fastened with a crosshead screwdriver.
- Ensure the toy is clean and free from debris.
Specs in practice
- Charging time
- 3-4 hours for the included 3.7V rechargeable battery.
- Controller power
- Requires 2 x 1.5V AA batteries (not included).
Images and diagrams
- The manual provides visual diagrams showing how to move the left and right rockers on the controller to achieve forward, backward, and spinning motions.
- Diagrams illustrate the correct polarity orientation for battery insertion.
Model compatibility
- Suitable for ages 6+.
- Only use the provided charger for the rechargeable battery.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.