Crystorama 2443-OP-BF Three Light Bathroom Vanity Installation Guide
Installation guide for the Crystorama 2443-OP-BF three-light bathroom vanity fixture. Includes mounting instructions, parts list, and bulb specifications.
Quick answers from the manual
Quick answer
- The Crystorama 2443-OP-BF is a three-light bathroom vanity fixture. Installation involves mounting the plate to the outlet box, attaching the backplate, securing the glass shades with socket rings, and installing three medium base bulbs. p. 1
Key actions
- Install mounting plate p. 1
- Install glass shades p. 1
Problems and fixes
Check power supply and bulb installation.
p. 1Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb Type | Medium Base | Standard socket type | p. 1 |
| Recommended Wattage | 60W | Recommended per bulb | p. 1 |
| Maximum Wattage | 100W | Maximum per bulb | p. 1 |
Where to find it in the PDF
- Installation and Specifications p. 1
- Parts List and Diagram p. 2
Table of contents
Quick guide from the manual
This document provides installation instructions for the Crystorama 2443-OP-BF vanity light. Always ensure the main power is turned off before beginning installation. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes. This fixture is damp rated, making it suitable for bathroom environments.
Installation
- Install the mounting plate to the outlet box using two outlet box screws.
- Install the backplate onto the mounting plate and secure it with the screws.
- Install the glass shade over the socket and secure it with the socket ring.
- Install the bulb (not included) into the socket.
Parts List
- Mounting hardware
- Mounting plate
- Backplate
- Screws
- Socket
- Glass shade
- Socket ring
Technical Specifications
- Bulb Type: 3 x Medium Base
- Recommended Wattage: 60 Watts
- Maximum Wattage: 100 Watts
- Rating: Damp rated
Manufacturer information
Crystorama
Practical help
Common problems
Verify that the power is on and the bulbs are correctly installed in the sockets.
Ensure the socket ring is tightened securely against the glass shade.
Before use
- Turn off main power at the circuit breaker
- Verify the outlet box is securely installed
- Ensure you have 3 Medium Base bulbs
- Confirm the installation location is suitable for a damp-rated fixture
Manual page author
David Miller
Documentation analyst