Installation Instructions for Danfoss RA 15/6T and RA 15/6TB Conversion Valves

Quick guide for installing Danfoss RA 15/6T and RA 15/6TB conversion valves. Learn how to mount the valve to your radiator and attach the thermostat head.

Table of contents

Quick guide from the manual

This document provides instructions for the installation of Danfoss RA 15/6T and RA 15/6TB conversion valves. It outlines the basic steps for mounting the valve to a radiator and attaching the thermostat head.

Installation

The installation process involves two main steps:

Mounting the Valve: Screw the valve body onto the radiator connection. Ensure the connection is secure and properly sealed.
Attaching the Thermostat Head: Align the thermostat head with the valve body. Push the head firmly onto the valve until you hear a click, indicating it is securely locked in place.

Product Identification

The document references specific product codes for different valve configurations, including 1/2" and 3/4" sizes. Ensure the selected valve matches the requirements of your radiator system.

Manufacturer information

Danfoss A/S

Brand profile

Manufacturer website https://www.danfoss.com Support https://www.danfoss.com/en/service-and-support/ Manufacturer manuals https://www.danfoss.com/en/service-and-support/downloads/

Practical help

Common problems

Thermostat head does not attach

Ensure the head is aligned correctly with the valve body and pushed firmly until it clicks.

Before use

Verify the valve size (1/2" or 3/4") matches your radiator connection.
Ensure the radiator system is depressurized before installation.
Check that you have the correct product code for your specific valve model.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.