Danfoss ICM Size 150 Repair Kit Installation Guide
Quick installation and parts identification guide for the Danfoss ICM size 150 repair kit (codes 027H7175 and 027H7481). Includes exploded view diagrams and component specifications.
Quick guide from the manual
This document provides the installation and parts identification guide for the Danfoss ICM size 150 repair kit. It is intended for technicians performing maintenance on the ICM valve assembly. Always ensure the system is depressurized and safe before beginning any maintenance work.
Component Identification
The repair kit includes specific seals and components required for the maintenance of the ICM size 150 valve. The exploded view diagram illustrates the correct assembly order of the following parts:
- Part 6: Seal (Diameter 196 mm / 7.72")
- Part 7: Seal (Diameter 142 mm / 5.59")
- Part 8: Fibre Seal (Diameter 220 mm / 8.66")
- Part 14: PTFE Seal (Diameter 144 mm / 5.67")
- Part 18: Internal component assembly
Each component listed above is included as a single unit (Total no. = 1) within the repair kit.
Manufacturer information
Danfoss A/S
Practical help
Common problems
Verify that the valve is specifically an ICM size 150 before using this kit.
Ensure the correct material (Fibre vs PTFE) is used for the specific seal location as indicated in the diagram.
Before use
- Verify that the repair kit code (027H7175 or 027H7481) matches your specific valve model.
- Ensure the system is fully depressurized before attempting any maintenance.
- Confirm the valve size is ICM 150.
- Inspect all new parts for damage before installation.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.