Installation Manual for Domus FLAUNT-PDT Pendant Light
Quick guide for installing the Domus FLAUNT-PDT pendant light. Includes specifications, safety warnings, and step-by-step installation instructions.
Quick answers from the manual
Quick answer
- The Domus FLAUNT-PDT is a pendant light requiring professional installation. It operates at 240V and supports a maximum 25W LED bulb with an E27 base. p. 1
Key actions
- Switch off power supply before installation. p. 1
- Hire a professional electrician for installation. p. 1
First start
- Ensure the power is off, mount the bracket, connect wires, attach the canopy, and install the bulb. p. 1
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Voltage | 240V | Operating voltage | p. 1 |
| Max Power | 25W LED | Maximum wattage for LED bulb | p. 1 |
| IP Rating | 20 | Ingress protection rating | p. 1 |
| Lamp Base | E27 | Compatible bulb base type | p. 1 |
Where to find it in the PDF
- Installation Manual p. 1
Table of contents
Important Information
The Domus FLAUNT-PDT is a pendant light designed for indoor use. Please adhere to the following safety and operational guidelines:
- Professional Installation: The lamp must be installed by a professional electrician.
- Power Safety: Ensure the power supply is switched off before fitting this product.
- Usage Precautions: Do not touch the lamp when in use. Keep the unit away from hot steam and corrosive gas.
Specifications
- Voltage: 240V
- Power: 25W LED Max
- IP Rating: 20
- Lamp Base: E27
Installation Instructions
Follow these steps to install the pendant light:
- Mounting: Secure the mounting bracket to the ceiling.
- Wiring: Connect the electrical wires (Live, Neutral, Earth) to the terminal block.
- Canopy Attachment: Attach the canopy to the mounting bracket.
- Assembly: Assemble the pendant stem and components.
- Finalization: Install the E27 bulb and complete the final assembly.
Practical help
Common problems
Light does not turn on
Ensure the power supply is switched on and the bulb is correctly installed in the E27 base.
Corrosion or damage
Ensure the lamp is installed away from sources of hot steam or corrosive gases.
Before use
- Ensure power supply is switched off at the mains
- Verify the installation location is suitable for an IP20 rated fixture
- Confirm a professional electrician is available for installation
- Check that the bulb used does not exceed 25W LED
Manual page author
Emily Carter
User documentation editor