Dreame Glass Top Coat Safety and Handling Instructions

Product Overview

Dreame Glass Top Coat is a professional-grade ultraviolet (UV) nail gel. It is a transparent liquid designed for cosmetic nail applications. Users should be aware that this product contains chemical components including Acrylates Copolymer, Hydroxypropyl Methacrylate, and HEMA, which require careful handling.

Safety and Hazards

This product is classified as a liquid that may cause allergic skin reactions and irritation to the eyes, skin, and respiratory tract. It is harmful if swallowed, inhaled, or absorbed through the skin. Do not spray or heat the product. Ensure adequate ventilation during use to avoid breathing vapors or mists.

First Aid Measures

• Inhalation: Move to fresh air. Seek medical attention if symptoms persist.
• Skin Contact: Immediately flush skin with soap and water. Remove contaminated clothing and shoes. Seek medical attention if irritation occurs.
• Eye Contact: Flush eyes with water for at least 15 minutes and seek immediate medical attention.
• Ingestion: Do not induce vomiting. Keep the individual calm and seek immediate medical attention.

Handling and Storage

To maintain product stability and safety, store the container tightly closed in a cool, well-ventilated area at or below 26°C (80°F). Keep away from heat, sparks, and open flames. Avoid contact with strong acids, bases, and oxidizing agents. Use only in areas with appropriate exhaust ventilation to control airborne contamination.

Exposure Controls and Personal Protection

When handling the product, use impermeable gloves (such as neoprene) and protective clothing to prevent skin contact. Wear safety goggles or glasses with side shields. In environments where splashing is possible, use chemical goggles combined with a full face shield. If ventilation is insufficient, use a COSHA-approved respirator.

Accidental Release and Disposal

In case of a spill, remove all sources of ignition and prevent the product from entering drains or open waters. Soak up the material with inert absorbent and store in a closed container until proper disposal. Dispose of the product in accordance with local governmental regulations.