Installation Guide for Eastbrook 40.0020 Mirror
Quick installation guide for the Eastbrook 40.0020 mirror. Learn how to safely mount your mirror, including drilling instructions, hardware requirements, and technical support contact details.
Table of contents
Quick Installation Guide
This document provides instructions for installing the Eastbrook 40.0020 mirror. Please ensure you use a manual screwdriver for all fixings to avoid damaging the product.
Installation Steps
- Prepare the mirror: Fix the shelves to the mirror using a manual screwdriver. Do not use an electric screwdriver.
- Mark the wall: Position the mirror at the desired hanging point and mark the drilling holes. Ensure the two holes are perfectly level.
- Drill and mount: Drill the holes in the wall and insert the wall plugs.
- Install screws: Screw the screws into the wall, leaving them 2-3 mm from flush to allow the mirror to hang securely.
- Hang the mirror: Place the mirror onto the screws using the hooks on the back.
Technical Support
If you require assistance, you can contact Eastbrook technical support:
Address: Eastbrook Road, Gloucester GL4 3DB
Technical Helpline: 01452 317890
Email: [email protected]
Practical help
Common problems
Ensure the two holes are marked at the same level before drilling.
Use a manual screwdriver only; do not use an electric screwdriver.
Before use
- Check wall surface suitability
- Ensure you have a manual screwdriver
- Verify the mirror position
- Check that the two holes are level
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.