findmanualpdf.com

Eco Worthy 12V 10W Mono Solar Panel User Guide

Quick guide for the Eco Worthy 12V 10W monocrystalline solar panel. Includes technical specifications, key features, and installation dimensions for charging 12V batteries and small appliances.

Table of contents

Manual images

Jump to the section

Quick guide from the manual

The Eco Worthy 10W 18V monocrystalline solar panel is designed for charging 12V batteries and powering small 12V appliances such as gate openers, chicken coops, and home security systems. It is suitable for use in caravans, camper vans, boats, houses, gardens, sheds, or farms.

Key Features

  • IP-65 waterproof junction box for outdoor durability.
  • Durable aluminum frame with tempered glass surface.
  • Built-in diode to prevent reverse current.
  • High efficiency monocrystalline cells (approx. 20% conversion efficiency).
  • Designed for a lifespan of over 20 years.

Technical Specifications

The following data is tested under Standard Test Conditions (STC: 1000W/m2, 25C, Air Mass 1.5):

Front view dimensions of the solar panel
Front view dimensions of the solar panel
Rear view and mounting details
Rear view and mounting details
  • Rated Power: 10W
  • Maximum/Peak Voltage (Vmp): 18V
  • Open Circuit Voltage (Voc): 22.4V
  • Short Circuit Current: 0.61A
  • Maximum Current: 0.56A
  • Dimensions: 337 x 200 x 18 mm (13.3 x 8.1 x 0.7 inch)
  • Weight: 0.75kg (1.65 lbs)
  • Cable Length: 100cm (39 inch)

Support and Contact

If you encounter technical problems, please contact Eco Worthy for assistance:

US Contact: 1-866-939-8222UK Contact: +44 20 7570 0328Email: [email protected]

Manufacturer information

ECO-WORTHY

Brand profile

Practical help

Common problems

System not charging or power failure

Check for improper installation, faulty peripheral devices, or damage caused by abnormal conditions. Ensure the panel is not contaminated with hazardous substances or debris.

Before use

  • Ensure the target battery or appliance is 12V compatible.
  • Verify the installation site is free from obstructions that block sunlight.
  • Check that the junction box is securely sealed.
  • Confirm the mounting surface can support the panel weight (0.75kg).

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.