Assembly Instructions for Ethan Allen 096272B Groton Glass Table Lamp
Quick assembly guide for the Ethan Allen 096272B Groton Glass Table Lamp. Includes step-by-step installation instructions, bulb requirements, and maintenance tips for the glass shade.
Table of contents
Quick Assembly Guide
This document provides instructions for assembling the Ethan Allen 096272B Groton Glass Table Lamp. Ensure all parts are present before discarding packaging. Do not connect the lamp to a power outlet until assembly is fully complete.
Assembly Instructions
- Insert the harp (C) into the harp saddle (D) by squeezing both sides of the harp.
- Remove the finial (A) from the harp (C). Place the lampshade (B) over the bolt at the top of the harp. Secure the shade by screwing the finial (A) back onto the bolt.
- Install the appropriate light bulb. Check the wattage label located on the socket to ensure the correct type and wattage are used.
- Remove the plastic cover from the electrical plug.
- Plug the lamp into an electrical outlet.
Maintenance
To clean the glass components, apply glass cleaner to a cloth first. Do not spray cleaner directly onto the metal parts of the lamp.
Manufacturer information
Ethan Allen
Practical help
Before use
- Verify all parts are present before discarding packaging
- Check the socket label for correct bulb type and wattage
- Remove the plastic cover from the electrical plug
Specs in practice
- Bulb Wattage
- Refer to the label on the socket to determine the maximum allowed wattage for the bulb.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.