findmanualpdf.com

User Manual for Extol Faucet Series

Quick guide for Extol faucets. Includes installation instructions, troubleshooting for leaks and flow issues, maintenance tips, and technical specifications.

Table of contents

Quick guide from the manual

This manual provides instructions for the installation, operation, and maintenance of Extol faucets. Ensure professional installation to avoid damage. Always use a filter to prevent sediment from clogging the cartridge.

Installation and Operation

Before installation, check the condition of the gaskets. If the gasket lacks a strainer, install a mechanical particle filter on the water pipe. Flush the pipes thoroughly before connecting the faucet. For thermostatic models, the left valve controls flow, and the right valve sets temperature; a safety lock prevents water hotter than 38°C.

Additional installation photo from page 6
Additional installation photo from page 6

Cleaning and Maintenance

Clean the faucet regularly with a soft cloth and standard cleaning agents. Remove limescale with bathroom-specific cleaners. Avoid strong acids, lyes, and abrasive materials, as these will permanently damage the surface.

Troubleshooting

If the mixing lever is loose, tighten the screw under the plastic cover. If water drips around the cartridge, tighten the brass nut under the chrome collar. If flow is weak, clean the aerator and gasket screens.

Technical Specifications

  • Recommended pressure: 0.1-0.5 MPa (1.0-5.0 bar)
  • Max temperature: 90°C
  • Recommended temperature: 65°C

Manufacturer information

Extol

Brand profile

Practical help

Common problems

Loose mixing lever

Remove the plastic cover marking hot/cold water and tighten the fastening screw.

Water dripping around cartridge

Remove the lever, unscrew the chrome collar, and tighten the brass cartridge nut with a wrench.

Weak water flow

Clean the aerator on the spout and the gasket screens on the water inlet.

Rotating spout hard to turn

Remove the spout flange, clean, lubricate, or replace the rubber ring.

Before use

  • Check the size and quality of the gaskets.
  • Ensure the gasket has a strainer.
  • Install a mechanical particle filter if the gasket lacks a strainer.
  • Flush the water pipes before installation.
  • Ensure hot water is connected to the left inlet.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.