FESTOOL CT 15-CT 25 Mobile Dust Extractor

Product Description

The Festool CT 15 and CT 25 are high-performance mobile dust extractors designed for professional environments. They are ideal for extracting non-hazardous dust, dirt, sand, chips, and water. These units are built for increased loads in commercial applications and are intended for indoor use only.

Technical Data

• Power consumption: 350 - 1200 W
• Max. suction capacity: 130 m³/h (extractor) / 222 m³/h (turbine)
• Max. vacuum: 24000 Pa
• Container capacity: 15 l (CT 15) / 25 l (CT 25)
• Protection class: IP X4

Safety Information

WARNING: Read all safety warnings and instructions. Failure to follow them may result in electric shock, fire, or serious injury. Operators must be adequately instructed on the use of these machines. Do not use for hazardous dust. Always operate with the filter system installed. If foam or liquid escapes, switch off immediately.

Setup and Operation

Before initial use, insert the filter bag and connect the suction hose. The extractor can be connected to a mains socket. When connected, the integrated electrical outlet module is live. The extractor can be started automatically by switching on a connected power tool or manually using the MAN button.

Maintenance and Care

Always disconnect the mains plug before performing any maintenance or cleaning. Regularly clean the fill level sensors and inspect them for damage. All maintenance and repair work requiring the motor housing to be opened must be carried out by an authorized service workshop. Use only original Festool spare parts.

Troubleshooting and Disposal

If the extractor overheats, the temperature cut-out will switch it off. Switch off and let it cool down for approximately 5 minutes. Do not dispose of the device in household waste. Recycle devices, accessories, and packaging in accordance with national regulations.