FLEX PD 2G 12-EC C Cordless Hammer Drill User Guide

Quick guide for the FLEX PD 2G 12-EC C cordless hammer drill. Includes technical specifications, key features, and equipment details for this 12V brushless tool.

Table of contents

Quick guide from the manual

The FLEX PD 2G 12-EC C is a 12V cordless hammer drill designed for professional use. This document provides essential technical specifications and feature highlights. Please note that this unit is part of the FLEX 12V battery system and is supplied without a battery or charger.

FLEX PD 2G 12-EC C cordless hammer drill

Key Features

Electronic Management System (EMS) for tool protection and efficiency.
Brushless motor for increased performance and longevity.
Electronic quick-stop brake.
Keyless chuck with Auto-Lock function.
Robust die-cast aluminum housing.
Integrated LED light with afterglow function and battery capacity indicator.
Ergonomic handle with non-slip rubberized surface.
Forward/reverse operation with safety lock.

Technical Data

Voltage: 12 V
Battery Capacity: 2.5 / 5.0 Ah
Max Torque (Hard/Soft): 58 Nm / 32 Nm
Torque Settings: 25 levels
No-load Speed (1st/2nd gear): 0-450 / 0-1700 rpm
No-load Impact Rate (1st/2nd gear): 0-5850 / 0-22100 bpm
Chuck Capacity: 1.5 - 13 mm
Max Drilling Diameter (Wood/Steel): 25 mm / 13 mm
Weight (without battery): 1.14 kg

Standard Equipment

1 Belt clip
1 Bit holder
1 Bit extension

Manufacturer information

FLEX

Brand profile

Manufacturer website https://www.flex-tools.com Support https://www.flex-tools.com/support Manufacturer manuals https://www.flex-tools.com/support/manuals

Practical help

Common problems

Tool does not start

Check if the forward/reverse switch is in the neutral (locked) position or if the battery is depleted.

Battery status unknown

Use the integrated LED battery capacity indicator on the tool to check the charge level.

Before use

Ensure you have a compatible FLEX 12V battery pack.
Verify the bit is securely tightened in the keyless chuck.
Check that the forward/reverse switch is set to the desired direction.
Select the appropriate gear (1 or 2) for your application.
Adjust the torque setting according to the material and screw size.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.