FrSky ACCESS XM 16CH Receiver Instruction Manual

Overview

The FrSky ACCESS XM is a compact 16-channel receiver designed for high-performance RC applications. It features a lightweight design and supports the advanced FrSky ACCESS protocol, ensuring reliable communication and easy setup.

Specifications

• Dimensions: 15 x 10 x 3.5 mm
• Weight: 1g
• Channels: Up to 16 channels via SBUS
• Operating Voltage: 3.5V to 10V
• Operating Current: 20mA at 5V
• Operating Range: Greater than 600m
• RSSI Output: Analog 0 to 3.3V
• Compatibility: Transmitters with ACCESS V1.1.2 or higher

Registration and Binding

The ACCESS protocol allows for seamless binding using the Smart Match technology. To register and bind your receiver:

• Set your transmitter to [Reg] status via the model setup menu.
• Connect power to the receiver while holding the F/S button. Both red and green LEDs will illuminate, indicating registration mode.
• Confirm registration on the transmitter.
• Once registered, select [Bind] on the transmitter and power the receiver again. The green LED will flash to indicate binding mode.
• Successful binding is confirmed when the green LED remains lit and the red LED turns off.

Failsafe Configuration

Failsafe is a critical safety feature that defines channel output positions if the control signal is lost. You can configure failsafe settings directly through the radio interface, supporting no-pulse, hold, and custom modes for each channel. Alternatively, you can set failsafe values by pressing the F/S button on the receiver while moving the desired channel to the target position after binding.

Maintenance and Support

The receiver firmware is upgradeable to ensure compatibility with future updates. For detailed operational instructions or troubleshooting, please refer to your specific radio manual or visit the official FrSky website. For technical assistance, contact the support team via email.