Installation Guide for Globe Electric 2-Light Flush Mount Fixture
Learn how to safely install your Globe Electric 2-Light Flush Mount Fixture. This guide covers electrical safety, step-by-step installation, and bulb requirements.
Quick answers from the manual
Quick answer
- This document provides installation instructions for the Globe Electric 2-Light Flush Mount Fixture (Model 60998). p. 2
Key actions
- Turn off power at the breaker or fuse box before starting. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb Type | Medium base (E26) | Standard bulb size | p. 2 |
| Max Wattage | 60W | Maximum power per bulb | p. 2 |
Show 1 more answers Show less
Where to find it in the PDF
- Safety Instructions p. 1
- Installation Instructions p. 2
Table of contents
Quick Guide
This document provides instructions for installing the Globe Electric 2-Light Flush Mount Fixture. Before beginning, ensure the power is turned off at the main circuit breaker or fuse box. Always verify the power is off using a voltage tester before touching any wires.
Safety Information
Electrical work requires basic knowledge. If you are unsure, consult a qualified electrician. Always use tools with insulated handles and ensure the fixture is properly grounded.
Installation Steps
1. Turn off the power at the wall switch or main breaker panel.
2. Install the mounting bracket to the outlet box.
3. Connect the wires: Connect the white neutral wire from the fixture to the white neutral wire from the outlet box. Connect the black live wire from the fixture to the black live wire from the outlet box. Connect the ground wire to the mounting bracket.
4. Secure the canopy to the mounting bracket using the decorative nuts.
5. Install two medium base (E26) bulbs (not included).
Technical Specifications
Bulb Type: Medium base (E26)
Maximum Wattage: 60 watts per bulb
Practical help
Common problems
Check if the circuit breaker is on and the bulb is properly installed.
Consult a qualified electrician.
Before use
- Turn off power at the main switch/breaker
- Verify power is off with a voltage tester
- Ensure you have the necessary tools
- Check that the junction box is compatible
Manual page author
Michael Turner
Technical manual editor