Installation Guide for Globo Lighting 24202S/24202A Mushroom Lamp
Step-by-step installation guide for the Globo Lighting 24202S and 24202A mushroom lamp. Includes assembly instructions, bulb requirements, and technical specifications.
Quick answers from the manual
Quick answer
- The Globo Lighting 24202S/24202A is a table lamp that requires a 1x MAX 4W E14 LED bulb and operates on 230V~ 50Hz power. p. 1
Key actions
- Assemble the lamp by following the numbered sequence 1-6, ensuring the LED bulb is installed before placing the shade. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb Base | E14 | Socket type | p. 1 |
| Max Wattage | 4W | Maximum power for LED bulb | p. 1 |
| Voltage | 230V~ | Operating voltage | p. 1 |
| Frequency | 50Hz | Operating frequency | p. 1 |
Show 1 more answers Show less
Where to find it in the PDF
- Assembly Diagram p. 1
Table of contents
Quick guide from the manual
This document provides assembly instructions for the Globo Lighting 24202S and 24202A mushroom lamps. Please note that this product is designed for use with LED bulbs only.
Assembly instructions
Follow these steps to assemble your lamp as shown in the diagram:
- Base preparation: Prepare the lamp base (1).
- Secure: Ensure the socket is properly seated (2).
- Insert bulb: Install the E14 LED bulb (3).
- Shade placement: Place the shade onto the base (4).
- Alignment: Align the shade correctly (5).
- Final cap: Secure the top cap (6).
Technical specifications
- Bulb type: 1x MAX LED 4W E14
- Power supply: 230V~ 50Hz
Manufacturer information
Globo Lighting
Practical help
Common problems
Lamp does not turn on
Ensure the LED bulb is correctly installed and that you are using a compatible E14 LED bulb. Check the power connection.
Before use
- Ensure you have a compatible E14 LED bulb (max 4W).
- Verify the power supply is 230V~ 50Hz.
- Unpack all components carefully before assembly.
Manual page author
Michael Turner
Technical manual editor