User Manual for Globo 15945H Pendant Light
Quick guide for the Globo 15945H pendant light. Includes installation steps, wiring instructions, and technical specifications for safe setup.
Quick answers from the manual
Quick answer
- This document provides installation instructions for the Globo 15945H pendant light, including wiring, mounting, and bulb installation steps. p. 1
Key actions
- Turn off the power supply at the circuit breaker before beginning installation. p. 1
- Mount the ceiling bracket and connect the electrical wires (L, Earth, N) according to the diagram. p. 1
- Attach the shade and install the E27 bulb. p. 1
First start
- Ensure the power is disconnected, complete the wiring and mounting, install the bulb, and then restore power. p. 1
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Max Wattage | 40W | Maximum power rating for the bulb | p. 1 |
| Socket Type | E27 | Compatible bulb base type | p. 1 |
| Voltage | 230V~ 50Hz | Operating voltage and frequency | p. 1 |
Where to find it in the PDF
- Installation instructions and technical specifications p. 1
Table of contents
Quick guide from the manual
This document provides essential instructions for the safe installation and operation of the Globo 15945H pendant light. Always ensure the main power supply is disconnected before beginning any electrical work.
Installation
- Safety First: Turn off the main power supply at the circuit breaker before starting installation.
- Mounting: Secure the mounting bracket to the ceiling.
- Wiring: Connect the house wires to the terminal block according to the diagram: L (Live/Brown), Earth (Yellow/Green), and N (Neutral/Blue).
- Assembly: Attach the canopy to the mounting bracket.
- Final Setup: Install the shade and the light bulb (1x MAX 40W E27).
- Power On: Restore power at the circuit breaker.
Technical Specifications
- Model: 15945H
- Bulb Type: E27
- Maximum Wattage: 40W
- Voltage: 230V~ 50Hz
Manufacturer information
Globo Lighting
Practical help
Before use
- Ensure the main power supply is switched off at the circuit breaker.
- Verify that your ceiling structure can support the weight of the pendant light.
- Check that your local power supply matches the 230V~ 50Hz specification.
- Ensure you have a compatible E27 bulb (max 40W).
Specs in practice
- 1x MAX 40W E27
- The fixture requires one E27 base bulb with a maximum power consumption of 40 Watts.
Manual page author
Michael Turner
Technical manual editor