User Manual for Globo 16046TS Table Lamp
Quick guide for the Globo 16046TS, 16046TG, and 16046TA table lamps. Includes assembly instructions, bulb requirements, and safety steps for installation.
Quick answers from the manual
Quick answer
- This manual provides instructions for the assembly and safe installation of the Globo 16046TS table lamp. p. 1
Key actions
- Turn off the power supply before beginning assembly. p. 1
- Assemble the lamp by placing the shade onto the base, securing it with the ring, and installing the light bulb. p. 1
First start
- Turn on the power supply after assembly is complete. p. 1
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb | 1xMAX 60W E27 | Maximum wattage and socket type | p. 1 |
| Voltage | 230V~ 50Hz | Operating voltage and frequency | p. 1 |
Where to find it in the PDF
- Assembly and Specifications p. 1
Table of contents
Quick Guide
This document provides assembly and safety instructions for the Globo table lamp series. Before beginning any installation, ensure the power supply is disconnected at the circuit breaker to prevent electrical shock.
Assembly Instructions
Follow the numbered steps provided in the diagram to assemble your lamp:
- Preparation: Ensure the power is turned off (Step A).
- Assembly: Follow the sequence indicated by the arrows in the diagram (Steps 1 through 3) to attach the shade and components to the base.
- Bulb Installation: Insert the light bulb into the socket (Step 4). Ensure the bulb type is E27 and does not exceed the maximum wattage of 60W.
- Completion: Once assembled, turn the power back on at the circuit breaker (Step C).
Operation
The lamp is operated using the inline switch located on the power cord. Toggle the switch to the 'on' or 'off' position as needed.
Technical Specifications
- Model Numbers: 16046TS, 16046TG, 16046TA
- Bulb Base: E27
- Maximum Wattage: 60W
- Voltage: 230V~ 50Hz
Manufacturer information
Globo Lighting
Practical help
Common problems
Ensure the bulb is screwed in securely, the power switch on the cord is in the 'on' position, and the circuit breaker is active.
Before use
- Turn off the power supply at the circuit breaker.
- Verify that the light bulb is an E27 type.
- Check that the bulb wattage is 60W or less.
- Ensure all parts are assembled according to the diagram.
Manual page author
Emily Carter
User documentation editor