User Guide for Grohe QuickGlue A2 Adhesive
Quick guide for Grohe QuickGlue A2 adhesive. Learn about surface compatibility, technical specifications, safety precautions, and proper application conditions.
Quick answers from the manual
Quick answer
- Grohe QuickGlue A2 is an adhesive for bathroom accessories. It requires clean, dry, and grease-free surfaces for proper application. p. 2
Key actions
- Ensure surfaces are clean, dry, and free of grease before application. p. 2
Problems and fixes
Check surface compatibility and cleanliness.
p. 2Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Processing temperature | +5°C to +40°C | Application range | p. 2 |
| Useable temperature | -40°C to +100°C | Temperature resistance | p. 2 |
Where to find it in the PDF
- Product Overview p. 1
- Technical Data and Safety p. 2
Table of contents
Quick guide from the manual
This document provides essential information for using the Grohe QuickGlue A2 adhesive. Ensure surfaces are clean, dry, and free of grease before application. The adhesive is designed for specific bathroom accessories and requires proper surface preparation for optimal performance.
Safety information
- The syringe is not a toy. Keep out of reach of children.
- Observe safety and hazard information on the adhesive packaging.
Technical data
- Processing temperature: +5°C to +40°C
- Useable temperature: -40°C to +100°C
- Relative humidity: 40-80% (min. 30%)
Surface compatibility
Compatible surfaces: Tiles, marble, natural stone, glass, concrete, wood, plastic, metal.
Incompatible surfaces (not recommended): Wallpaper, plaster, coating, plastics like PE, PTFE, and PP.
Environment and recycling
- Dispose of unopened, unused adhesive at a hazardous waste collection site.
- Dispose of cured adhesive with domestic waste.
Practical help
Common problems
Ensure the surface is clean, dry, and free of grease. Verify the surface material is not incompatible (e.g., PE, PTFE, PP).
Do not use on wallpaper, plaster, or coatings as they lack sufficient load capacity.
Before use
- Clean the surface thoroughly.
- Ensure the surface is dry.
- Remove all grease from the surface.
- Verify the surface material is compatible.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.