Installation Guide for Hama 00210942IMA Protective Glass for Apple Watch

Step-by-step installation and removal guide for the Hama 00210942IMA protective glass case for Apple Watch. Learn how to properly clean, attach, and remove the protective cover.

Table of contents

Quick guide from the manual

This guide covers the installation and removal of the Hama 00210942IMA protective glass case for Apple Watch. The case consists of two parts: a front protective cover and a back securing frame. Proper cleaning of the watch display before installation is essential to prevent dust entrapment.

Installation

Clean the smart watch display thoroughly.
Remove the back of the case and peel off the inner backing film.
Attach the front of the case to the smart watch, starting at an angle on the side of the button.
Attach the back of the case and press it firmly into place.
Pull off the backing film on the outer display of the case.

Removal

On the back of the case, lift the left-hand top corner (marked with 'open') and pull off the back of the case.
To remove the front, lift the case on the side without buttons and pull off in the direction of the buttons.

Manufacturer information

Hama GmbH & Co KG

Brand profile

Manufacturer website https://www.hama.com Support https://support.hama.com Manufacturer manuals https://support.hama.com

Practical help

Common problems

Case is difficult to remove

Ensure you are removing the back part first by lifting the corner marked 'open', then remove the front part by lifting from the side without buttons.

Dust or bubbles under the screen

Ensure the watch display is completely clean and dry before applying the case.

Before use

Clean the Apple Watch display thoroughly.
Ensure the protective case is free of debris.
Identify the 'open' mark on the back of the case.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.