Holiday Living 016-753N-R 6 FT Lamp Post with Swag User Manual
Quick guide for the Holiday Living 6 FT Lamp Post with Swag (016-753N-R). Includes assembly instructions, electrical specifications, and troubleshooting steps.
Table of contents
Quick guide from the manual
This document provides assembly and troubleshooting instructions for the Holiday Living 6 FT Lamp Post with Swag (Model 016-753N-R). The estimated assembly time is 5 minutes. If parts are missing or damaged, do not attempt assembly. For support, contact 888-251-1006 or email [email protected].
Package contents
- A: Lamp Post with Swag
- B: Pole
- C: Base
- D: Stakes (x2)
Assembly instructions
- Prepare base: Place the base (C) on a level surface near a wall outlet. Insert the two stakes (D) into the base (C).
- Install pole: Insert the pole (B) into the base (C).
- Attach lamp: Insert the lamp post (A) into the pole (B).
- Power connection: Plug the adapter into an electrical outlet.
Electrical specifications
- Input: 120V~60Hz, 0.3A
- Output: 4.5V 300mA
- Adapter Model: YJ-L045UO-300
Troubleshooting
If the item does not light up:
- Ensure the power is turned on.
- Check the extension cord connection.
- If the adapter is damaged, replace it with a new one.
Safety and compliance
This equipment complies with Part 15 of the FCC Rules. It is designed for residential installation. If interference occurs, try reorienting the antenna, increasing separation from the receiver, or connecting to a different circuit.
Practical help
Common problems
Ensure power is on, check extension cord, or replace the adapter if damaged.
Before use
- Verify all parts are present against the package contents list.
- Do not assemble if any parts are missing or damaged.
- Ensure the assembly surface is level.
- Locate a wall outlet nearby.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.