Innokin GO Z 1500mAh Pen Kit User Guide

Product Overview

The Innokin GO Z is a compact, user-friendly pen-style vaping device featuring a 1500mAh integrated battery and a 2ml tank capacity. It is designed for simplicity and consistent performance.

Getting Started

To begin using your device, follow these steps:

• Filling the Tank: Push the mouthpiece in the direction of the arrow to slide open the top cap. Fill with e-liquid, ensuring you do not overfill. Wait 5 minutes after filling a new coil to allow it to prime properly.
• Power On/Off: Click the power button 5 times rapidly to turn the device on or off.
• Adjusting Airflow: Rotate the base of the tank to adjust the airflow to your preferred draw.

Coil Replacement

Ensure the tank is empty before changing the coil. Twist the base to open, pull out the old coil, insert a new one, and twist the base back to close securely.

Battery and Charging

Use a high-quality 5V wall charger and the included micro-USB cable. Never leave the device charging unattended. The LED indicator shows the current battery level:

• Red: Below 20%
• Red & Green: 20% - 70%
• Green: 70% - 100%

Safety Protections

The device includes several built-in safety features:

• Low Voltage Protection: Red LED flashes 4 times. Charge the battery.
• Short Circuit Protection: Red & Green LED flashes 4 times. Check the tank/coil and replace if necessary.
• Time Out Protection: Red & Green LED flashes 3 times. Press the button again.
• High Temperature Protection: If the PCB temperature exceeds 115°C, the device will reduce power until it returns to a safe operating temperature.

Maintenance and Important Tips

• Keep the 510 connection clean of debris and e-liquid.
• Maintain the tank at least 1/3 full to ensure longevity and flavor quality.
• Do not vape if the tank is empty.
• Replace the coil immediately if you notice a burnt taste or a reduction in flavor/vapor production.