Assembly Instructions for Invicta Interior 36330 Console Desk
Quick assembly guide for the Invicta Interior 36330 console desk. Includes parts list, step-by-step assembly instructions, and load capacity specifications.
Table of contents
Quick Assembly Guide
This document provides instructions for assembling the Invicta Interior 36330 console desk. Ensure you have all parts before beginning assembly and perform the assembly on a soft surface to prevent scratching the wood.
Parts List
- A: Table top (x1)
- B: Legs (x2)
- C: Screws 50x8mm (x8)
- D: Washers 8x25mm (x8)
- E: Allen key 6mm (x1)
Assembly Instructions
- Place the table top (A) face down on a soft, protected surface.
- Position the legs (B) against the table top.
- Secure each leg using the provided screws (C) and washers (D).
- Tighten all screws firmly using the Allen key (E).
Specifications
Maximum Load Capacity: 50kg
Manufacturer Contact
For any questions regarding this article, please contact the dealer or the manufacturer: riess-ambiente.de GmbH, Kirchenweg 9, 24568 Nützen, Germany. Email: [email protected]. Phone: +49 4101 - 80 40 600.
Official resources from the manual
Manufacturer information
Invicta Interior GmbH & Co. KG
Practical help
Common problems
Ensure all 8 screws (C) are tightened evenly and the floor surface is level.
Before use
- Verify all parts (A, B, C, D, E) are present.
- Prepare a soft surface (e.g., carpet or blanket) to assemble the desk to avoid damage.
- Ensure you have the included 6mm Allen key.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.