User Guide for IPEVO VZ-R ULTRA 13MP Document Camera

Quick guide from the manual

The IPEVO VZ-R ULTRA is a 13MP document camera designed to capture documents, textbooks, and 3D objects. It supports two main operating modes: HDMI (direct to display) and USB (connected to a computer). Before first use, the weighted base must be attached to the stand using the provided screws and screwdriver.

Getting to know your VZ-R ULTRA

The device features a multi-jointed stand for flexible positioning and a swiveling camera head. Control buttons are located on the main unit:

• Light: Toggles the built-in LED.
• Filter: Applies video filters.
• Rotate: Rotates the live image.
• Zoom In/Out: Adjusts the image magnification.
• Exposure: Increase or decrease brightness.
• Focus Button: Press once to focus. Hold for 2 seconds to toggle between AutoFocus-Continuous (AF-C) and AutoFocus-Single (AF-S).

The LED indicator shows status: Green (powered on), White (in use/streaming).

Connecting to HDMI displays

1. Connect an HDMI cable (not included) from the camera to your TV, monitor, or projector.
2. Connect the included USB Type-C to USB Type-A cable to the camera's USB port and a power source (USB port on the display or a 5V/1A power adapter).
3. Turn on the device using the Power Switch.

Using USB mode

Connect the camera to a computer using the included cable. The microphone is only functional in this mode. For optimal performance, use the IPEVO Visualizer software, available at support.ipevo.com/vz-r_ultra.

Safety and precautions

Avoid using or storing the device in the following environments:

• Near heat sources.
• Near steam or greasy smoke.
• Locations with high humidity.
• Sandy or dusty places.