Ivy Bronx 014-HG-30424-WH Lounge Chair Assembly Instructions

Step-by-step assembly guide for the Ivy Bronx 014-HG-30424-WH lounge chair. Includes a complete parts list, detailed assembly diagrams, and support contact information.

Table of contents

Assembly Overview

This document provides instructions for assembling the Ivy Bronx lounge chair. Ensure you have a clear, flat workspace before beginning to avoid scratching the floor or the furniture components.

Parts List

A: Side frame (x2)
B: Crossbar (x1)
C: Backrest support (x2)
D: Seat/Backrest upholstery (x1)
E: Cushion (x1)
F: M6x25MM screws (x4)
G: M6x40MM screws (x4)
H: M6 Hex key (x1)

Assembly Steps

Assembly diagram showing parts list and 6-step installation process.

Frame Assembly: Connect the side frames (A) with the crossbar (B) using the M6x40MM screws (G).
Seat Attachment: Align the seat/backrest upholstery (D) with the top of the side frames (A).
Positioning: Adjust the frame slightly to install the front-end, then pull it up into the final position.
Backrest Support: Insert the backrest supports (C) into the designated slots on the frame.
Final Tightening: Secure all remaining screws (F) using the provided hex key (H).
Completion: Place the cushion (E) onto the assembled frame.

Support

If you encounter any issues during assembly or are missing parts, please contact customer service at [email protected].

Practical help

Common problems

Parts do not align during assembly

Do not fully tighten screws until all parts are connected. Loosen screws slightly to allow for frame adjustment, then tighten once aligned.

Missing hardware

Verify all parts against the parts list. If items are missing, contact the support email provided in the manual.

Before use

Clear a large, flat area for assembly.
Identify all parts (A-H) before starting.
Ensure you have the provided M6 hex key.
Do not fully tighten screws until the entire frame is assembled.
Check stability on a level floor after assembly.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.