Home Appliances / Personal Care
User Manual for IZZY 14.8V G7 Stick Vacuum Cleaner
Quick guide for the IZZY 14.8V G7 stick vacuum cleaner. Learn how to charge, operate, clean filters, and maintain your device for optimal performance.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This vacuum cleaner is designed for indoor domestic use. Before first use, ensure the battery is fully charged (approx. 5 hours). The device features two power modes: ECO (approx. 45 minutes runtime) and MAX (approx. 20 minutes runtime). Always empty the container and clean the filters after each use to maintain suction performance.
Safety instructions
- Do not use on wet surfaces or outdoors.
- Do not immerse the device or charger in water.
- Keep hair, loose clothing, and body parts away from openings and moving parts.
- Do not use to pick up sharp objects, hot materials, or flammable liquids.
- If the device gets wet, unplug immediately and contact an authorized service center.
Charging the appliance
You can charge the device directly or via the charging base. Place the base on a flat, stable surface. Connect the charger to the battery or the base socket. The indicator light will flash during charging and show 100 when fully charged. The device will not operate while charging.
Using the appliance
Ensure the container and filters are installed. Press the power button to start in ECO mode. Use the speed adjustment button to toggle between ECO and MAX modes. Press the power button again to turn off the device.
Maintenance and cleaning
Empty the container after every use by pressing the release button. Remove the metal filter and HEPA filter by turning them counterclockwise. Wash them with warm water (no detergent) and ensure they are completely dry before reassembly. Do not use a dishwasher.
Technical characteristics
- Motor power: 200W
- Battery: 14.8V, 2200mAh Li-ion
- Charging time: Approx. 5 hours
- Voltage: 100-240V ~ 50/60 Hz
Manufacturer information
IZZY
Practical help
Common problems
Device not working
Ensure the device is not currently in the charging process, as it does not operate while charging.
Weak suction
Check if the container is full or if the filters are clogged. Clean the filters and empty the container.
Indicator light flashing
This indicates the battery is weak and the appliance needs to be charged.
Before use
- Ensure the container and filters are correctly positioned.
- Check that the device is switched off before installing or removing accessories.
- Ensure the mains voltage matches the device requirements.
- Remove large or sharp objects from the floor to prevent filter damage.
Specs in practice
- Charging time
- Approximately 5 hours
Images and diagrams
- The parts diagram identifies the main body, battery, container, filters, charging base, and various accessories.
- The control panel diagram shows indicators for battery power, blocked filter, and operating modes (ECO/MAX).
Model compatibility
- Use only original spare parts.
- Do not use in outdoor areas or on wet surfaces.
- Do not charge the battery at temperatures above 37°C or below 0°C.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.