Installation and Specification Guide for James Martin Vanities 72" 3cm Countertops
Technical specifications and dimensional drawings for James Martin Vanities 72-inch 3cm countertops, including models 050-S72, 080-S72, and 090-S72. Includes detailed hole placement and sizing for installation planning.
Table of contents
Technical Specifications and Dimensional Drawings
This document provides the precise dimensional specifications for the James Martin Vanities 72-inch 3cm countertops. Use these diagrams to plan your vanity installation, specifically for faucet and drain placement.
080 and 090 Series Countertops
The 080 and 090 series countertops feature a total width of 72 inches (1829mm) and a depth of 23 1/2 inches (597mm). Key measurements include:
- Faucet Holes: 1 3/8" (35mm) diameter.
- Drain Holes: 1 3/4" (45mm) diameter.
- Spacing: Refer to the diagram for specific center-to-center measurements between faucet and drain cutouts.
050 Quartz Series Countertops
The 050 Quartz series shares the same overall dimensions of 72 inches (1829mm) by 23 1/2 inches (597mm), but features different internal cutout spacing compared to the 080/090 series. Always verify your specific model's cutout requirements against the provided diagram before drilling or installation.
Installation and Warranty Information
For detailed installation instructions and warranty coverage, please visit the official website at www.jamesmartinvanities.com.
Official resources from the manual
Manufacturer information
James Martin Vanities
Practical help
Common problems
Verify the drain and faucet hole center-to-center measurements in the diagram against your existing plumbing rough-in before installation.
Ensure the vanity cabinet is level and provides adequate support across the full 72-inch length of the countertop.
Before use
- Verify the specific model number (050-S72, 080-S72, or 090-S72) matches your countertop.
- Confirm the vanity cabinet width matches the 72-inch countertop size.
- Check the faucet and drain hole locations against your plumbing rough-in.
- Ensure the countertop is supported properly across its entire length.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.