User Guide for JBL Wireless Microphone (2-Pack)
Quick start guide for the JBL Wireless Microphone (2-Pack). Learn how to set up your dual-channel UHF microphones, connect the USB receiver, and follow essential care and safety instructions.
Quick answers from the manual
Quick answer
- To set up the JBL Wireless Microphone (2-Pack), turn on the microphones using the power button, plug the USB receiver into your speaker or amplifier's mic input, and adjust the volume on your device. p. 1
Key actions
- Power on microphones p. 1
- Connect receiver p. 1
First start
- Power on, connect receiver, and adjust volume. p. 1
Maintenance and reset
- Turn off mics when not in use to save power. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Range | 30m | Maximum stable signal distance | p. 1 |
| Channels | 2 | Independent channels for dual-person use | p. 1 |
Where to find it in the PDF
- Quick Start Guide p. 1
Table of contents
Quick guide from the manual
The JBL Wireless Microphone (2-Pack) is a plug-and-play system designed for karaoke, live performances, and audio recording. To set up the system, follow these three steps:
- Power On: Press the power button on each microphone to turn them on. The microphones will automatically pair with the receiver.
- Connect: Plug the USB receiver into the microphone input of your speaker or amplifier.
- Test: Adjust the volume on your audio device and test the audio output.
Product Overview
This is a dual-channel UHF wireless microphone system. It is designed for ease of use with no drivers required.
What's Included
- 2 x Wireless Microphones
- 1 x USB Receiver
- Quick Start Guide
Key Features
- UHF Wireless Transmission: Provides a stable signal range of up to 30 meters.
- Dual-Person Use: Features 2 independent channels (CH-3 / CH-6) allowing two people to use the microphones simultaneously.
- Plug-and-Play: No driver installation is required.
- Battery Life: Designed for all-day use.
Care & Safety
- Keep the microphones away from water and high heat sources.
- Turn off the microphones when not in use to conserve battery power.
- Avoid dropping the microphones or subjecting them to physical impact.
Manufacturer information
JBL
Practical help
Common problems
Ensure the receiver is securely plugged into the microphone input of your speaker or amplifier and that the microphones are powered on. The system uses auto-pairing.
Before use
- Ensure the USB receiver is connected to the speaker or amplifier's mic input.
- Power on both microphones using the button on each unit.
- Adjust the volume on your connected audio device.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.