Instruction Manual for Just Light LOKI 12W Table Lamp
Quick guide for the Just Light LOKI 12W table lamp, including assembly steps, technical specifications, and light source replacement instructions.
Table of contents
Quick guide from the manual
This document provides essential assembly and technical information for the Just Light LOKI table lamp (model 900081). The lamp is designed for indoor use and operates on a standard 230V/50Hz power supply.
Assembly and installation
- Ensure the lamp is disconnected from the power source before assembly.
- Unscrew the retaining ring from the lamp socket (step 2).
- Place the lampshade onto the socket (step 3/4).
- Secure the lampshade by screwing the retaining ring back onto the socket (step 5).
- Insert the E14 LED bulb into the socket (step 6).
- Connect the power plug to a standard wall outlet (step 7).
- Use the switch on the base to turn the lamp on or off.
Technical specifications
- Model: 900081 LOKI
- Power: 5W
- Socket: E14
- Luminous flux: 430 lm
- Color temperature: 3000 K
- Lifespan: 15,000 h
- Switching cycles: 15,000 x
- Start-up time: < 0.5 s
Contact information
For support, contact JUST LIGHT GmbH, Olakenweg 36, D-59457 Werl. Phone: +49(0)2922 9721 9290. Email: [email protected]. Website: www.just-light.info
Official resources from the manual
Manufacturer information
JUST LIGHT
Practical help
Common problems
Check if the plug is securely connected to the wall outlet and ensure the bulb is properly screwed into the E14 socket.
Before use
- Verify the power supply is 230V/50Hz
- Ensure the E14 LED bulb is compatible (5W max)
- Check that the lampshade is securely fastened with the retaining ring
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.