Installation Guide for Kendall Howard 2U 2-Piece Telco Rack Shelf
Quick installation guide for the Kendall Howard 2U 2-Piece Telco Rack Shelf (1906-3-300-02). Includes tools required, step-by-step mounting instructions, and support contact details.
Table of contents
Quick guide from the manual
This document provides installation instructions for the Kendall Howard 2U 2-Piece Telco Rack Shelf (Part Number: 1906-3-300-02). The installation requires basic tools and hardware that are sold separately.
Tools needed
- Phillips screwdriver
- Rack screws and cage nuts (sold separately)
Installation
Follow these steps to install the shelves:
- Determine height: Decide on the desired height for the shelves within your rack.
- Install shelf: Using rack screws and/or cage nuts, install eight screws into each shelf. Ensure all hardware is fully tightened.
- Repeat: Repeat the process for the second shelf.
Support
If you require assistance, you can contact Kendall Howard:
- Phone: 651-213-1333 (8:00 AM to 5:00 PM CST)
- Email: [email protected]
- Mail: 10152 Liberty Lane, Chisago City, MN 55013
- Web: www.kendallhoward.com
Official resources from the manual
Practical help
Before use
- Ensure you have a Phillips screwdriver
- Verify you have rack screws and cage nuts (sold separately)
- Determine the desired height for the shelves
Images and diagrams
- The diagrams show the shelf being attached to the rack rails using screws.
- Step 1 illustrates the installation of the first shelf.
- Step 2 illustrates the installation of the second shelf.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.