Kobalt 17-Gallon Electric Air Compressor User Manual

Product Overview

The Kobalt 17-Gallon Electric Air Compressor is an oilless, single-stage, direct-drive unit designed for various inflation and cleaning tasks. It features an electric motor with an automatic overload protector, a pump, a pressure switch, and a 17-gallon storage tank.

Safety Guidelines

Warning: Read all safety precautions before operation. Failure to comply may result in serious injury or property damage.

• Fire/Explosion: Operate in a well-ventilated area. Do not spray flammable liquids in confined spaces.
• Bursting: Drain tank moisture daily to prevent corrosion. Do not weld or modify the tank.
• Electrical Shock: Ensure proper grounding. Do not use in rain or on wet surfaces.
• Injury: The unit starts automatically. Always disconnect power and bleed pressure before servicing.
• Burns: Do not touch the pump, manifold, or transfer tube during operation.

Assembly and Startup

Install the handle using the provided bolts. Position the compressor at least 12 inches from walls to ensure proper ventilation. For initial startup, ensure the tank petcock is closed, plug in the power cord, and turn the switch to the ON position. Adjust the regulator to the required tool pressure.

Maintenance

Regular maintenance is essential for trouble-free operation:

• Daily: Drain moisture from the tank using the petcock and pull the pressure relief valve ring to ensure it functions correctly.
• Weekly: Inspect air hoses and power cords for wear or damage.
• Storage: Clean the unit, disconnect power, release all tank pressure, and drain moisture before storing in a dry place.

Troubleshooting

If the compressor fails to start or maintain pressure, check for:

• Open tank petcock or leaking fittings.
• Tripped motor overload protection (allow to cool).
• Blown fuses or tripped circuit breakers.
• Excessive extension cord length or incorrect wire gauge.

If issues persist, contact the authorized service center at 1-866-307-4104.