LEEDARSON 14aSA-PR1800ST-W1MS-01 LED Lamp User Guide

Product Overview

The Leedarson 14aSA-PR1800ST-W1MS-01 is an advanced LED lamp equipped with an integrated microwave motion sensor. This energy-efficient lighting solution is designed for automated operation in residential settings, providing convenience and security.

Installation and Operation

To ensure proper functionality, follow these steps for installation:

• Turn off the power supply to the light fixture before installation.
• Install the LED bulb securely into the fixture.
• Turn the power back on.
• Wait for approximately 60 seconds for the sensor to initialize.

Once initialized, the bulb will automatically turn on when motion is detected. It will remain illuminated for 60 seconds after the last detected motion. Please note that power must be continuously supplied to the fixture for the motion sensor to function correctly.

Performance Tips

For optimal sensor performance, consider the following recommendations:

• Install the bulb facing downwards in a fixture mounted at a height of approximately 9 feet.
• Be aware that metal fixtures may interfere with or impact the performance of the motion sensor.
• The microwave sensor has a detection range of up to 10 feet at a 120-degree angle.
• Note that the microwave sensor may detect motion through walls.
• Recommended applications include driveways, hallways, staircases, porches, and closets.
• Always adjust color temperature or sensor settings while the power is turned off.

Safety and Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that the device does not cause harmful interference and must accept any interference received. Users are advised to maintain a minimum distance of 20 cm between the radiator and their body during operation to comply with FCC radiation exposure limits. Any unauthorized modifications to the unit may void the user's authority to operate the equipment.