Leuchten Direkt 996443 Ceiling Light Installation Guide
Installation guide for the Leuchten Direkt 996443 ceiling light. Includes wiring instructions, mounting steps, and technical specifications for 2x E27 bulbs.
Table of contents
Quick Installation Overview
This document provides the installation procedure for the Leuchten Direkt 996443 ceiling light. Ensure the power supply is disconnected before starting any electrical work.
Installation Steps
- Power Off: Switch off the main power supply at the circuit breaker.
- Preparation: Drill holes in the ceiling using a 6mm drill bit.
- Mounting: Secure the mounting bracket to the ceiling using the provided screws and anchors.
- Wiring: Connect the house wiring to the terminal block. Match the wires as follows: a = Ground (Earth), b = Neutral (N), c = Live (L).
- Fixture Attachment: Secure the light fixture to the mounting bracket.
- Bulb Installation: Screw in the light bulbs.
- Power On: Restore power at the circuit breaker.
Technical Specifications
- Voltage: 230V / 50Hz
- Bulb Compatibility: 2x E27, max 60W
Manufacturer information
LeuchtenDirekt GmbH
Practical help
Common problems
Wiring confusion
Ensure wires are connected to the terminal block correctly: a=Ground, b=Neutral (N), c=Live (L).
Mounting issues
Ensure the drill bit size is exactly 6mm for the provided anchors.
Before use
- Ensure power is switched off at the circuit breaker.
- Verify the drill bit size is 6mm.
- Identify the wiring connections: a=Ground, b=Neutral, c=Live.
- Check that the bulbs used do not exceed 60W each.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.