Matt Blatt George Nelson Replica 152cm Platform Bench User Guide

Product Overview

The George Nelson Replica 152cm Platform Bench is a stylish and functional piece of furniture designed for home or office use. This guide provides all the necessary information to assemble your bench quickly and safely.

Components

Before beginning assembly, ensure you have all the following parts included in the package:

• 1x Table top
• 2x Table bases
• 8x 30mm M8 Screws
• 8x M8 Spring washers
• 8x M8 Washers
• 1x Allen key

Assembly Instructions

Follow these steps to assemble your platform bench:

Step 1: Preparing the Hardware

Start by threading the M8 spring washers and M8 washers onto each of the 30mm M8 screws. This ensures the hardware is ready for attachment.

Step 2: Attaching the Bases

Position the table bases against the underside of the table top. Align the holes in the bases with the pre-drilled holes in the table top. Insert the prepared screws through the bases and into the table top. Use the provided Allen key to tighten all screws securely. Ensure all connections are firm before placing the bench in its final location.

Care and Maintenance

To keep your platform bench in excellent condition, follow these maintenance tips:

• Regularly check and tighten all screws to ensure the bench remains stable.
• Clean the surface with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners that may damage the finish.
• Keep the bench away from direct heat sources and excessive moisture to prevent warping or damage to the material.
• Periodically inspect the structure for any signs of wear or loose components.

Safety and Support

Always assemble the bench on a flat, stable surface. Do not exceed the weight capacity of the bench. If you encounter any issues during assembly or require further assistance, please visit the official support website for the most up-to-date information and troubleshooting help.