Mondawe 15D2020PT Patio Dining Table Assembly Instructions
Quick assembly guide for the Mondawe 15D2020PT Patio Dining Table. Includes a complete parts list, step-by-step assembly instructions, and contact information for customer support.
Table of contents
Quick guide from the manual
This document provides assembly instructions for the Mondawe 15D2020PT Patio Dining Table. It includes a complete parts list and a two-step assembly process. For any assistance, you can contact Mondawe support via their website, phone, or email.
Parts List
- A: Table top (x1)
- B: Table leg connector ring (x1)
- C: Legs (x4)
- D: Center cap (x1)
- E: Washers (x16)
- F: Screws 1/4"x22 (x8)
- G: Screws 1/4"x35 (x8)
- H: Allen key (x1)
Assembly Instructions
Follow these steps to assemble your table:
- Positioning: Fix all screws in place, but do not tighten them completely at this stage. This allows for minor adjustments to ensure all parts align correctly.
- Final Tightening: Once you have confirmed the position of all screws and the table is stable, proceed to fully tighten all screws and nuts using the provided Allen key.
Support
If you require assistance, please contact Mondawe:
Website: www.mondawe.comPhone: 888-328-5111Email: [email protected]
Official resources from the manual
Practical help
Common problems
Ensure all screws are inserted loosely before tightening any of them to allow for adjustment.
Check that all screws are fully tightened after the initial assembly steps.
Before use
- Verify all parts (A-H) are present according to the parts list
- Clear a flat, clean area for assembly to avoid scratching the table top
- Do not fully tighten screws until all are in place
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.