Namron 200W Towel Dryer User Manual
Quick guide for the Namron 200W Towel Dryer. Includes installation requirements, technical specifications, and operating instructions for the timer and temperature control.
PDF source: NO · summary: English
Quick answers from the manual
Quick answer
- The Namron 200W Towel Dryer is a bathroom heating unit featuring a 1-9 hour timer and 10-30°C temperature control. It is IP24 rated and requires a 600mm clearance from the floor. p. 1
Key actions
- Mount the unit on the wall ensuring a minimum distance of 600mm from the floor. p. 1
Maintenance and reset
- The unit features automatic shutdown after 300 days of operation. p. 1
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power | 200W | Heating output | p. 1 |
| IP Rating | IP24 | Water resistance | p. 1 |
| Dimensions | 550x700x96mm | Physical size | p. 1 |
Where to find it in the PDF
- Product Overview and Specifications p. 1
Table of contents
Quick guide from the manual
The Namron 200W Towel Dryer is designed for bathroom use, providing a heated surface for towels. It features a built-in timer (1-9 hours) and adjustable temperature control (10-30°C). The unit is rated IP24, making it suitable for wet rooms.
Installation
The towel dryer must be installed in accordance with the provided mounting instructions. Ensure the following requirement is met:
- Minimum distance to floor: 600mm
The package includes the towel dryer, a 1.5m fixed cable, wall mounting brackets, and the user manual.
Operation and Safety
The device includes several safety features to ensure reliable operation:
- Short-circuit protection
- Overload protection
- Over-temperature protection
- Automatic shutdown after 300 days of continuous operation (per IEC 60335-1)
Technical Specifications
The unit operates on 220-240V at 50/60Hz. It has a power output of 200W and a standby consumption of 0.15W. The operating temperature range is 5°C to +40°C with a relative humidity tolerance of 8-80%.
Manufacturer information
Namron AS
Practical help
Common problems
The unit is designed to automatically shut down after 300 days of operation as a safety feature (IEC 60335-1).
Before use
- Verify the wall mounting location allows for a minimum of 600mm clearance from the floor.
- Ensure the power supply is 220-240V 50/60Hz.
- Confirm the installation area is suitable for an IP24 rated device.
- Check that all mounting brackets are included in the package.
Manual page author
Michael Turner
Technical manual editor