Plumbing / Pipe Supports
User Guide for nVent CADDY 150M0250EG Standard U-Bolt
Quick guide for the nVent CADDY 150M0250EG Standard U-Bolt. Includes product specifications, dimensions, load capacity, and installation safety information.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides essential specifications and safety information for the nVent CADDY 150M0250EG Standard U-Bolt. This component is designed for pipe support in general piping applications. Ensure all installation procedures are followed to maintain safety and warranty validity.
Product Overview
The 150M0250EG is a steel, electrogalvanized U-Bolt designed for secure pipe support. The package comes complete with 4 nuts, with 2 nuts installed on each end.
Technical Specifications
- Material: Steel
- Finish: Electrogalvanized
- Pipe Size: 2 1/2 inch
- Outer Diameter (OD): 2 7/8 inch
- Rod Size (RS): 1/2 inch
- Screw Length (L): 3 inch
- Static Load (F): 2020lb
- Dimensions: A: 5 3/4 inch, B: 3 3/8 inch
Diagrams
The U-Bolt dimensions are defined as follows:
- A: Total length of the U-Bolt assembly.
- B: Width between the two threaded rods.
- L: Length of the threaded section (screw length).
- OD: Outer diameter of the supported pipe.
- RS: Rod size diameter.
- F: Direction of the static load.
Safety and Installation
nVent products must be installed and used only as indicated in the official product instruction sheets and training materials. Improper installation, misuse, or misapplication may cause product malfunction, property damage, serious bodily injury, or death, and may void your warranty.
Customer Support
For further assistance or to obtain additional instruction sheets, visit www.nvent.com or contact your nVent customer service representative.
North America: +1.800.753.9221 (Option 1 – Customer Care, Option 2 – Technical Support)
Europe: Netherlands: +31 800-0200135; France: +33 800 901 793; Germany: 800 1890272; Other Countries: +31 13 5835404
APAC: Shanghai: + 86 21 2412 1618/19; Sydney: +61 2 9751 8500
Official resources from the manual
Practical help
Common problems
Improper installation or misuse
Follow nVent installation sheets and training materials strictly to avoid product malfunction, property damage, or injury.
Before use
- Verify the pipe size matches the 2 1/2 inch requirement.
- Ensure the structure can support the 2020lb static load.
- Confirm all 4 nuts are present (2 on each end).
- Check compatibility with Federal Specification WW-H-171 (Type 24).
- Check compatibility with ANSI/MSS-SP-58 (Type 24).
Specs in practice
- Static Load (F)
- The maximum load capacity of 2020lb that the U-Bolt is rated to support.
Images and diagrams
- A: Total length of the U-Bolt.
- B: Width between the rods.
- L: Threaded screw length.
- OD: Outer diameter of the pipe.
- F: Direction of the static load.
Model compatibility
- Conforms with Federal Specification WW-H-171 (Type 24).
- Conforms with Manufacturers Standardization Society ANSI/MSS-SP-58 (Type 24).
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.