nVent 16P58SM Conduit to Flange Clip Side Mount User Guide
Quick guide for the nVent 16P58SM Conduit to Flange Clip. Includes installation requirements, product specifications, and load limits for 1-inch EMT conduit.
Quick answers from the manual
Quick answer
- The nVent 16P58SM is a side-mount conduit clip for 1-inch EMT, rigid, or aluminum conduit, designed for installation with a hammer on flanges 5/16 to 1/2 inch thick. p. 1
Key actions
- Install the clip using a hammer. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| EMT Conduit Size | 1 inch | Compatible conduit size | p. 1 |
| Flange Thickness | 5/16" – 1/2" | Compatible flange thickness | p. 1 |
| Ultimate Static Load | 25 lb | Maximum load capacity | p. 1 |
Where to find it in the PDF
- Product Specifications p. 1
- Diagrams and Warnings p. 2
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides essential information for the nVent 16P58SM conduit clip. It is designed for side-mounting 1-inch EMT, rigid, or aluminum conduit to flanges. The clip is engineered for simple, hammer-on installation and features a 360-degree pivot.
Product Overview
The 16P58SM is a side-mount conduit clip constructed from spring steel with an nVent CADDY Armour finish. It is designed to securely attach conduit to structural flanges.
Specifications
- EMT Conduit Size: 1 inch
- Outer Diameter: 1.181" – 1.378"
- Flange Thickness: 5/16" – 1/2"
- Ultimate Static Load: 25 lb
Installation
The clip is designed for easy installation using only a hammer. Before proceeding, ensure that the flange thickness and the conduit outer diameter fall within the specified ranges listed above. Improper installation or misuse may lead to product failure, property damage, or injury.
Safety Warnings
nVent products must be installed and used only as indicated in the product instruction sheets. Improper installation, misuse, or failure to follow instructions may void the warranty and cause serious bodily injury or property damage.
Practical help
Common problems
Verify the conduit outer diameter is between 1.181" and 1.378".
Ensure the flange thickness is between 5/16" and 1/2".
Before use
- Verify flange thickness is 5/16" – 1/2"
- Verify conduit outer diameter is 1.181" – 1.378"
- Ensure you have a hammer for installation
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.