Installation Guide for Philips CorePro LED PLL
Quick installation guide for the Philips CorePro LED PLL lamp. Includes safety warnings, compatibility requirements, and step-by-step installation instructions.
Table of contents
Important Information
The Philips CorePro LED PLL is designed for general lighting applications. Please ensure the luminaire is compatible with high-frequency operation before installation.
Safety Warnings
- Do not use with dimmers: This lamp is not compatible with dimming circuits.
- Dry conditions only: Use only in dry environments or luminaires that provide protection against moisture.
- Emergency luminaires: This lamp is not suitable for use in emergency lighting fixtures.
- Cooling: Do not touch the lamp until it has cooled down after operation.
Installation
Follow these steps to install the lamp:
- Power Off: Ensure the power supply to the luminaire is switched off.
- Remove Old Lamp: Carefully remove the existing fluorescent lamp from the fixture.
- Insert New Lamp: Insert the Philips CorePro LED PLL lamp into the socket.
- Power On: Switch the power supply back on.
Manufacturer information
Philips
Practical help
Common problems
Lamp does not turn on or flickers
Ensure the luminaire is designed for high-frequency operation and that no dimmer is connected.
Lamp is not suitable for the fixture
Verify that the fixture is not an emergency luminaire and is located in a dry environment.
Before use
- Verify the luminaire supports high-frequency operation.
- Ensure the installation environment is dry.
- Confirm the fixture is not an emergency luminaire.
- Ensure the power is switched off before starting installation.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.