Philips CorePro LED Strip 2.3W865 Datasheet
Technical specifications and product data for the Philips CorePro LED Strip 2.3W865. Includes dimensions, electrical requirements, dimming compatibility, and installation parameters.
Table of contents
Quick guide from the manual
This document provides technical specifications for the Philips CorePro LED Strip 2.3W865. Please note that this product requires an external 24V driver, which is not included in the package. Ensure the installation environment is suitable for an IP20-rated device.
Product Overview
The CorePro LED Strip is a 5-meter lighting solution designed for general uniform lighting. It is a slim, flexible LED strip suitable for various indoor applications.
Technical Specifications
- Input Voltage: 24V DC
- Power Consumption: 10.5W
- Luminous Flux: 300 lm/m
- Color Temperature: 6500K
- Color Rendering Index (CRI): 80
- Protection Class: Safety class III
Mechanical Dimensions
- Overall Length: 5,000 mm
- Overall Width: 8 mm
- Overall Height: 1.3 mm
Dimming and Compatibility
The LED strip is dimmable. However, the dimming functionality depends entirely on the external driver used (e.g., 1-10V, DALI). Ensure your driver is compatible with these protocols.
Operating Conditions
- Ambient Temperature Range: -20 to +40 °C
- Ingress Protection: IP20 (Finger-protected, not waterproof)
- Median Useful Life: 35,000 hours (L70B50)
Manufacturer information
Philips
Practical help
Common problems
Ensure a compatible 24V DC driver is connected correctly. The product does not include a driver.
Verify that the external driver supports the dimming protocol (1-10V, DALI, etc.) and is compatible with the strip.
Before use
- Ensure you have a compatible 24V DC power supply/driver.
- Verify the installation area is dry (IP20 rating means no water protection).
- Check that the power supply capacity is sufficient for 10.5W.
- Confirm the 5m length is appropriate for your installation space.
Manual page author
Michael Turner
Technical manual editor