Datasheet for Philips FlexFit T8 LED Lamp 10.5T8
Technical specifications and installation overview for the Philips FlexFit T8 LED lamp (10.5T8). Learn about hybrid Type A/B operation, electrical ratings, and dimensions.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Philips FlexFit T8 LED lamp is designed for installation flexibility, supporting both plug-and-play (UL Type A) and direct-wire (UL Type B) configurations. This lamp is compatible with a wide range of ballasts and offers a long operational life of 50,000 hours.
Installation and Operation
The lamp features hybrid technology:
- Type A (Plug and Play): Compatible with existing ballasts.
- Type B (Direct Wire): If the ballast fails, you can bypass it by cutting the ballast from the system and wiring the tube directly to line voltage (120-277V).
Technical Specifications
- Voltage: 120-277 V
- Power Consumption: 10.5 W
- Color Temperature: Selectable between 3000K, 3500K, 4000K, 5000K, and 6500K
- Beam Angle: 220 degrees
- Base: G13
- Lifetime: 50,000 hours
Dimensions
The lamp has a length of 35-7/16 inches. Refer to the dimensional drawing in the datasheet for precise measurements (A1, A2, A3) and diameter (D) to ensure compatibility with your fixture.
Safety and Maintenance
The lamp is suitable for use in closed luminaires. It operates within an ambient temperature range of -4 to +113 °F. The maximum T-Case temperature is 131 °F.
Manufacturer information
Philips
Practical help
Common problems
If the ballast fails, cut the ballast from the system and wire the tube directly to line voltage (120-277V).
Before use
- Verify voltage compatibility (120-277V).
- Ensure the fixture is suitable for T8 lamps.
- Check if the ballast is compatible (Type A) or if direct wiring (Type B) is required.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.