Philips FlexFit T8 LED Tube User Guide
Quick guide for the Philips FlexFit Hybrid UL Type A + B T8 LED tube. Learn about installation options (plug-and-play or direct wire), electrical specifications, and compatibility.
Table of contents
Manual images
Click an image to enlargeQuick Guide to FlexFit Hybrid T8
The Philips FlexFit T8 LED lamp is designed for installation flexibility, supporting both Type A (plug-and-play) and Type B (direct wire) configurations. This allows the lamp to be used with existing ballasts or wired directly to line voltage if the ballast fails.
Installation and Wiring
The lamp supports two installation methods:
- Type A (Plug and Play): Compatible with existing ballasts.
- Type B (Direct Wire): If the ballast fails, simply cut the ballast from the system and wire the tube directly to line voltage (120-277V).
Technical Specifications
- Voltage: 120-277 V
- Power Consumption: 12 W
- Wattage Equivalent: 32 W
- Cap-Base: G13
- Beam Angle: 220 degrees
- Ambient Temperature Range: -20 to +45 °C
- Nominal Lifetime: 50,000 hours
Controls and Compatibility
The lamp is dimmable, but only when used with specific dimmers. It is suitable for use in closed luminaires.
Manufacturer information
Philips
Practical help
Common problems
If the ballast fails, cut the ballast from the system and wire the tube directly to line voltage (120-277V).
The lamp is only compatible with specific dimmers. Ensure your dimmer is compatible with this LED tube.
Before use
- Verify the existing fixture base is G13.
- Determine if the installation will be Type A (plug and play) or Type B (direct wire).
- Ensure the ambient temperature is between -20°C and +45°C.
- Check if the existing ballast is compatible if using Type A installation.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.