Philips Bustan LED Bollard Light User Manual
Quick installation and setup guide for the Philips Bustan LED Bollard Light. Learn how to safely mount, wire, and operate your outdoor lighting fixture.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides installation instructions for the Philips Bustan LED Bollard Light. Before starting, ensure the main power supply is switched off. The installation requires basic tools including a drill, screwdriver, and pencil. The product is rated IP44, suitable for outdoor use, but must be installed according to local electrical regulations.
Installation steps
- Preparation: Turn off the power at the circuit breaker.
- Disassembly: Remove the housing from the base using the provided hex key.
- Mounting: Mark the drilling holes on the surface, drill, and secure the base using the provided screws and plugs.
- Wiring: Connect the mains power supply to the terminal block inside the base. Ensure wires are securely fastened.
- Reassembly: Place the housing back onto the base and secure it with the screws.
- Completion: Turn the power back on at the circuit breaker.
Technical specifications
- Ingress Protection: IP44 (Splash-proof)
- Voltage: 230V
Manufacturer information
Philips
Practical help
Common problems
Check if the power supply is switched on at the circuit breaker. Ensure wiring connections are secure.
Before use
- Ensure power is switched off at the main circuit breaker.
- Verify you have all necessary tools: drill, screwdriver, pencil, utility knife.
- Check that the mounting surface is suitable for the provided screws and plugs.
- Ensure the installation area is protected from direct water jets (IP44 rating).
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.